
Desk 01
Robots & spares
New and used KUKA robots, and new, used and refurbished robot spare parts, checked and tested before they ship. ABB, FANUC and other brands on request. Send a part number or a photo of the rating plate.
Robot spares · Machining · Air filters · Enfield, London
aksutec supplies new and used KUKA robots and tested robot spare parts, arranges build-to-print machining in Türkiye and supplies TAF air filters, from Enfield, North London.
Line stopped? Call +44 7534 068005. Drawings and longer questions: info@aksutec.com.
aksutec is a small engineering company, so the website follows how the work arrives: a part number from a maintenance engineer, a drawing from a buyer, a filter size from a facilities team. Pick the desk that matches your request, or use the form above and say what you need. A person reads every request and replies with what we can do, in what condition and how long it takes.

Desk 01
New and used KUKA robots, and new, used and refurbished robot spare parts, checked and tested before they ship. ABB, FANUC and other brands on request. Send a part number or a photo of the rating plate.
Desk 02
Robotic cells, welding fixtures and automation systems designed around your process, and build-to-print machining: your drawing, manufactured in Eskişehir, Türkiye and delivered to you.

Desk 03
Panel, bag, HEPA, compact, activated carbon, high-temperature, metal and fan-coil filters from TAF. aksutec is the exclusive representative in Great Britain. Send type, size, class and quantity.
Every request follows the same route, whether it is a drive module, a machined bracket or a pallet of bag filters. The route sheet below is the actual order of work: enquiry, drawing review, manufacture, inspection, delivery. The how-we-work page explains each station, including what we check and what we never claim.
Robot spares
For robot spare parts, “tested” is a process we can describe, not a badge. Each step is done by a person, and where a step cannot be done for a given part, we tell you before you order. Ask us for the test notes for your part.
Choose by construction first, then by class and size. Each type page shows how the filter is built, where it is used and what we need to specify it: width, height and depth in millimetres, the class you need (ISO 16890 or EN 1822) and the quantity. Standard and custom sizes are available, so send the dimensions you have.

Flat pleated panels in a frame, for general ventilation and pre-filtration.

Deep pockets of filter media on a header frame, for larger airflows.

Mini-pleat packs for high-efficiency filtration, specified to EN 1822 class.

V-bank construction that packs a large media area into a short housing depth.
A carbon bed between media layers, for odour and gas-phase filtration.
Deep-pleat media with metal separators in a steel frame, for heat.

Layered mesh in a frame that can be cleaned and used again.
Thin pleated panels cut to fit fan-coil unit housings.
We do not publish a stock list, because a list we cannot keep current would mislead you. Send the part number or a photo of the rating plate and a person checks. We tell you whether we can supply it, in what condition, and how long it takes, before you order anything.
We check and reply as fast as we can, by phone or email. If your line is stopped, phone +44 7534 068005 first. The written request can follow while we are already looking.
We deliver to factories and sites in the UK and Europe. Tell us the delivery address when you ask. Before you order we confirm the delivery method, the expected date and the cost.
Yes, if the rating plate is readable. Photograph the plate square on, in daylight if you can, and add the robot model and controller type. If the plate is worn, send photos of the part from two sides and where it sits in the machine, and we work back from there.
KUKA is the main line. ABB, FANUC and other brands are available on request: send the part number or the robot model and we check whether we can source it. We say so plainly when we cannot.
You send a drawing. We have the part manufactured in Eskişehir, an industrial city in Türkiye with an established manufacturing base, to your drawing and the inspection requirements we agree with you, and deliver it to you in the UK or Europe. Nothing is made until the drawing and the quotation are agreed.
There is no fixed minimum. Tell us the quantity, whether it is one spare part or a repeat batch, and we quote for that.
The filter type, the size as width, height and depth in millimetres, the class you need (ISO 16890 or EN 1822) and the quantity. If you are not sure of the class, describe the application and the airflow, and we work from that.
If a robot is down, phone first and send the written request afterwards, so the part number is on record. If you are planning a cell, a machined batch or a filter order, send the drawing or the dimensions through the form and we reply with questions or a quotation. We check and reply as fast as we can, by phone or email.