Desk 01 · Robots & spares

KUKA robots and spare parts, checked before they ship.

aksutec supplies new and used KUKA robots and tested robot spare parts from Enfield, North London, to factories in the UK and Europe. ABB, FANUC and other brands on request.

Line stopped? Call +44 7534 068005. Drawings and longer questions: info@aksutec.com.

Drawing
AKS-RS
Sheet
02 / 17
Rev
2026-11-16
What do you need?

Send a part number or a photo of the rating plate. A person checks every request; this is not an automatic stock search.

Line stopped? Call first. We will pick up the request below too.

Robot part details
Rating plateoptional
Add a photo of the rating plateJPEG, PNG, WebP or HEIC, up to 8 MB.
More detail (optional)
Machining, cell or fixture details
Drawingoptional
Attach a drawingPDF, STEP, STP, DXF, DWG, PNG or JPG, up to 8 MB.
More detail (optional)
Air filter details
More detail (optional)

For example G4, F7 or H13.

Your details
Add a message

Files up to 8 MB. We use your details only to answer this request.

Rows of orange KUKA industrial robots standing on a white factory floor
Manufacturer image: KUKA

New and used robots, and the brands we handle.

KUKA is our main line. We supply new and used KUKA robots, and the spare parts that keep them running. ABB, FANUC and other brands are available on request: send the model or the part number and we check whether we can source it, and tell you plainly when we cannot.

Tell us the robot type, the payload and reach you need, and the controller generation. We come back with what is available, in what condition, and how it was checked. aksutec is an independent supplier, and the KUKA pictures on this page are manufacturer images. Robot cells built around a robot are on the cells and fixtures page.

Spare part families, by what they do.

These are the families we are asked for most. The list is text on purpose: we do not publish a stock list, because a list we cannot keep current would be worse than none. Send the part number and a person checks.

Drives and servo amplifiers
Power modules and axis drives for the robot controller.
Power supplies
Controller and cabinet supplies, including low-voltage units.
Control boards
Controller PCs, motherboards, interface and safety boards.
Teach pendants
Handheld operator units and their cables.
Cables
Motor, encoder, data and teach-pendant cables.
Motors
Axis servo motors, with brakes and encoders where fitted.
Gearboxes
Axis reduction gears, for the arm and the base.
Wrist assemblies
Wrist and hollow-shaft units on the last three axes.
KUKA smartPAD teach pendant next to three robot controller cabinets and a compact controller unit
Manufacturer image: KUKA
KUKA smartPAD teach pendant beside an orange and grey robot controller cabinet
Manufacturer image: KUKA

New, used, refurbished: what each one means.

These three words are used loosely in the trade, so here is what they mean when aksutec uses them. Whichever you choose, we state the condition on the quotation and say what was done to the part.

Part conditions and what aksutec states for each
ConditionWhat it meansWhat we tell you
NewA part that has not been installed or run.We give the part number and, where marked, the revision, and tell you how it was sourced.
UsedA part taken from a working machine. It is sold as used.It goes through the test process below. We record the test date and tell you what was and was not tested.
RefurbishedA used part that has been repaired or had worn components replaced, then tested again.We say what was replaced or repaired before you order, so you can compare it with a new part.

What “tested” means, step by step.

“Tested” on this site describes a process. It is not a certificate and it is not a promise that a part will never fail. It does mean that a person has looked at the part, matched it to the number you asked for, and run a function test where one is possible. Ask us for the test notes for your part.

  1. 01

    Identify

    We match the part number against your rating-plate photo or drawing and note the revision and serial number where the part carries them.

  2. 02

    Inspect

    Visual inspection of housings, connectors, boards and cable ends for damage, corrosion and signs of earlier repair.

  3. 03

    Function test

    A function test where a test rig or a suitable controller is available for that part. Where a part cannot be function-tested, we say so before you order.

  4. 04

    Label

    The part is labelled with the test date and our reference, so the record and the part stay together.

  5. 05

    Pack

    Packed against shock and, for electronic parts, static discharge, with the label readable from outside the box.

Checked · part no.Visual inspectionFunction test where possibleLabelled · dated
Illustration: a drive module on the bench with test leads and a tagDRIVE00-xxx-xxxTAG00-xxx-xxxDRIVE MODULETEST LEADSTAGBENCH TEST
Illustration

Identify the part before we quote.

Most delays on a stopped line come from an unclear part number. The rating plate carries what we need: the type designation, the part or material number, the serial number and often the revision. Photograph it square on, with the text sharp, and add the robot model and the controller type.

What to send, in order of usefulness:

  • A photo of the rating plate, or the part number typed out.
  • The robot model and the controller type, if you know them.
  • Quantity, and whether new, used or refurbished is acceptable.
  • Where it goes, and whether the line is stopped.

If the plate is worn or missing, photograph the part from two sides and where it sits in the machine. We work back from the connector types, the mounting and the robot model, and we ask before we assume.

Illustration: shelving with labelled boxes of robot parts00-142-87100-207-56600-318-20400-503-31800-455-09300-661-13000-094-65700-189-74200-872-411PART NO. LABELSPARES SHELVING
Illustration
Generic six-axis articulated robot with axes A1 to A6A1A2A3A4A5A6BASEWRIST FLANGE6-AXIS ARM · SIDE VIEW

Six axes, six places a part can fail.

A six-axis arm is named by its axes, A1 at the base to A6 at the flange. Knowing which axis a fault belongs to narrows the part search quickly, because each axis has its own motor, gearbox and cable run. The drawing is a generic arm, not a specific model.

A1
Base rotation. The whole arm turns on the column. Motor, gearbox and the base cabling sit here.
A2
Shoulder. The lower arm swings forward and back and carries most of the static load.
A3
Elbow. The upper arm swings relative to the lower arm and sets the reach.
A4
Forearm roll. Turns the wrist assembly around the arm axis.
A5
Wrist bend. Tilts the flange up and down.
A6
Flange rotation. The last axis turns the tool. Cables for the tool run through or past it.

Related desk

Planning a robot cell or a fixture?

If you need a system built around a robot, a welding fixture, or a part machined to your drawing, that is a different desk. We design robotic cells, welding fixtures and automation systems, and arrange build-to-print machining in Eskişehir, Türkiye. The parts desk and the cells desk share one request form, so you can start from either.

Robot spares: common questions.

Do you sell new or used KUKA robots?

Both. Tell us the model, the payload and reach you need, and the controller generation. We tell you what is available, in what condition, and how it was checked. ABB, FANUC and other brands are available on request.

What is the difference between new, used and refurbished?

New means the part has not been installed or run. Used means it came from a working machine and is sold as used. Refurbished means a used part that has been repaired or had worn components replaced, then tested again. We say which one a part is, and what was done to it, before you order.

How long will delivery take?

It depends on stock and on the part. We tell you before you order, together with the cost and the delivery method. If the line is stopped, say so in the request and phone us first.

Can you identify a part from a photo of the rating plate?

Usually, yes. Send a square-on photo of the plate with the robot model and controller type. The part number, revision and serial number are what we match against. If the plate cannot be read, we ask for more photos instead of guessing.

What does tested mean?

It is a process: identify the part number and revision, inspect it visually, run a function test where a test rig or controller is available for that part, label it with the test date and our reference, and pack it. Ask us for the test notes for your part.

Do you deliver outside the UK?

Yes. We deliver to the UK and to Europe. Give us the delivery address in the request and we confirm the method, date and cost before you order.

Is there a minimum quantity?

No fixed minimum. One part is fine. Tell us the quantity you need.