How we work · The route sheet

How a request moves from enquiry to delivery.

aksutec, a small engineering company in Enfield, North London, handles every request for robot parts, machining or air filters in the same five steps, from first message to delivery in the UK or Europe.

Line stopped? Call +44 7534 068005. Drawings and longer questions: info@aksutec.com.

Drawing
AKS-HW
Sheet
15 / 17
Rev
2026-11-16

One route sheet, five stations.

A drive module, a machined plate and a pallet of bag filters look nothing alike, but they travel the same route. The sheet shows it: enquiry in London, drawing review, manufacture in Eskişehir where the job needs it, inspection, and delivery. The line is drawn once, and nothing skips a station. What changes from job to job is what happens inside each one, and that is set out below.

Route sheet: enquiry in London, drawing review, manufacture in Eskişehir, inspection, delivery01ENQUIRYLONDON, UK02DRAWINGREVIEW03MANUFACTUREESKİŞEHİRTÜRKİYE04INSPECTION05DELIVERYRoute sheet: enquiry in London, drawing review, manufacture in Eskişehir, inspection, delivery01ENQUIRYLONDON, UK02DRAWINGREVIEW03MANUFACTUREESKİŞEHİRTÜRKİYE04INSPECTION05DELIVERY
01

Enquiry

You send a part number, a rating-plate photo, a drawing or a filter size through the request desk, or you phone. A person reads it. We do not run an automatic stock search, because a search box without a reliable list behind it would only look helpful. If something is missing, such as the robot model, the material or the class, we ask one short question rather than guess. For a stopped line, call first: the written request can follow while we are already checking. Whatever the route, you get a reference in the form AKS-YYMMDD-XXXX so both sides can point at the same request.

02

Drawing review

For machined parts, fixtures and cells, an engineer reads the drawing before anyone quotes. We look at tolerances that drive cost, material and finish, features that are hard to hold, and anything that is unclear or contradicts itself between views. We write back with questions, not assumptions. For spare parts the same step is a part-number check: does the number match the robot and controller you named, and does the revision matter. For filters it is a check of size, class and airflow. Nothing moves on until the request describes one exact thing.

03

Manufacture in Eskişehir

Machined work is placed with manufacturing partners in Eskişehir, an industrial city in Türkiye with an established manufacturing base. We agree the quotation, lead time and inspection requirements with you first, then place the work against your drawing. For spare parts this station is sourcing and, where it applies, refurbishment: we find the part in the condition you asked for and say plainly whether it is new, used or refurbished. Filters come from TAF, whose products we supply in Great Britain.

04

Inspection

Machined parts are manufactured to your drawing and the inspection requirements we agree before the order is placed. What gets measured, and with what, is written down in that agreement, not assumed. Spare parts go through the test process described on the robot spares page: identify, inspect, function test where a rig or controller is available, label with the test date. You can ask for the test notes for your part. Filters are checked against the specified size and class on the order before dispatch.

05

Delivery

Goods are packed for transport and sent to your address in the UK or Europe. Before you order we tell you the delivery method, the expected date and the cost, and which of those depend on stock, on the part or on the carrier. If a date moves, you hear it from a person and not from a tracking page. Paperwork travels with the goods. After delivery, tell us if a part does not fit or a batch does not match the order, and we take it up with you.

How fast we answer, and what we promise.

We check and reply as fast as we can, by phone or email.

That is a promise about replying, not about delivery. A reply says what we can do with your request, in what condition and what we still need from you. Lead times for parts and machined work depend on stock, on the part and on the workshop, and we give you one before you order, never after.

If a line is stopped, phone first. The written request can follow while we are already looking, and it puts the part number on record. For drawings and longer questions, email is better, because we can answer everything in one message. The contact page has both.

What we never do, and why it matters to you.

A request desk is only useful if you can believe what comes back from it. These are the things we leave out on purpose. They are as much a part of how we work as the five stations.

A stock search with nothing behind it
There is no search box that pretends to know what is on a shelf. A person checks every request, and tells you what is available.
Claims we cannot document
No superlatives, no certificates we do not hold, no inspection we have not agreed. If we cannot show it, we do not say it.
A price for a drawing nobody has read
Quotations follow the drawing review, not the other way round. A price given before anyone has looked is a guess.
A relationship we do not have
We say what we supply and where it comes from. We do not suggest a link to a manufacturer that does not exist.
Customers and projects shown without permission
We do not name customers, and we do not show a project unless its owner allows it.
Generated pictures of parts, workshops or jobs
Drawings on this site are labelled as illustrations. Product photos come from the manufacturer or from us.

Process: common questions.

Who reads my request?

A person. Every request is read by someone at aksutec who can identify a part or read a drawing. There is no automatic stock search behind the form.

What happens if you cannot supply what I asked for?

We tell you, and we say why. If a close alternative exists, such as a different revision or a refurbished unit, we describe the differences and leave the choice to you.

Do you give prices on the website?

No. Parts, drawings and filters differ too much for a fixed price list. You get a written quotation for your request, with the delivery method and date.

Who do I talk to?

A person who can read a part number or a drawing. Phone +44 7534 068005 or write to info@aksutec.com.